Category: Uncategorized
Uncategorized
Showing 1–12 of 37 results
-
Ignition Switch 4-Position for Tractor Golf Cart Car – Key Switch Replacement Universal Compatible with Ford Jubilee Massey Ferguson Caterpillar Garden Lawn Tractor Truck Forklift Skid-Steer Loader
$9.49Add to cartAbout this item
- 【Universal Replacement】This Ignition Key Switch is universal for tractors, cars, trucks, forklifts, compatible with Caterpillar, Ford Jubilee, and Massey Ferguson, for agricultural & plant applications.
- 【4 Position Switch】The ignition start switch controls 4 functions, Acc/Off/IGN/Start, key removal in Off positionand, Starter switch has 4 connection terminals (ACC/BAT/ING/ST) on the back, ACC goes to accessories e.g. lights, radio etc, BAT for +12V feed from battery, IGN for ignition system, and ST goes to starter moto solenoid. Simply connect wires to the appropriate stud.
- 【Durable Ignition Switch】This ignition key switch is made of high quality bakelite and zinc alloy, with high hardness and strong corrosion resistance. It is not easy to deform and jiggle during operation, durably designed for a long service life.
- 【Application】The ignition switch comes with 2 keys both work well on a 12-volt and 6-volt car, and the switch is grounded to the vehicle frame. so a ground terminal is not needed. A separate push button is not required to start your car.
- 【Easy to Mount】The ignition key switch designed in panel mounting type makes it easy to replace for your equipment and operation without any special tools.Mounting Hole diameter is approximately 3/4″.
-
Trimmer Spool Cap Cover Compatible with Kobalt KST 120X KST 120X-06 Weed Eater String Trimmer, Replacement Spool Cover Compatible with Kobalt 40-Volt String Trimmer – 3 Pack, Blue
$9.99Add to cart- 【Compatible Models】Trimmer spool cap cover is compatible with Kobalt 40-volt cordless string trimmer KST 120X-06 (506886) and KST 120X (651246).
- 【Function】The trimmer spool cap can protect the spool line and attach it to the weed eater tightly.
- 【Easy to Install】Simply remove the old cap, snap the new cover onto the spool wire and then tighten it, no replacement tools required.
- 【Premium Material】The weed eater replacement spool cover is made of polyamide that is sturdy, shock-proof, and long-serving.
- 【Package Include】3 pack trimmer spool cap (2.93 x 1.17 inch).
-
Replacement AS1300 Trimmer Spool Line Compatible with EGO String Trimmer, Weed Eater Pre-Wound Line for EGO 15 Trimmer ST1500 ST1500-S Weed Eater, 0.095 inch 15Ft Pre-Wound Line Spool, 4 Pack
$13.59Add to cartAbout this item
- 【Compatible with】The replacement AS1300 string trimmer spool is compatible with EGO Power+ 56V 15-inch String Trimmer, model ST1500, ST1500-S, ST1501-S, and ST1502.
- 【Efficient Working】Pre-wound replacement spools save you time from winding, provide more efficient cutting, and perform well with your EGO trimmer. Excellent for edging lawns and keeping things clean.
- 【Easy to Replace】① Take a few inches of line out of the spool and insert it into the hole. ② Remove the old spool and insert the new one in its proper location. ③ Thread the line through the trimmer head’s hole. ④ Mount the housing with the cap.
- 【Durable Material】The weed eater spool is made of high quality ABS material, and line is made of durable polyamide nylon, which is strong and longer lasting, making your yard weeding efficient.
- 【Specification】Package included: AS1300 replacement spool x 4 pcs, line diameter: 0.095″, line length: 15 feet. For detailed size please check the picture.
-
6501EA1001C Washer Water Level Sensor Switch Assembly Compatible with LG Washing Machines WT1101CW WT4970CW – 6501EA1001R Water Level Pressure Switch Compatible with Kenmore Elite Washer 79629002000
$12.99Add to cart- 【Compatible Models】The washer water level sensor switch assembly is compatible with①LG Washer T1743ADFSP5, T1743HDFP, T1743HDFS5, T1743HDFSP. ②Kenmore Elite washer 79629002000, 79629002010, 79629272000, 79629272010. For exact models, please check the description.
- 【Replace Part Number】6501EA1001C, 6501EA1001R, PD00022947, 5210FA3427J, EBF62754506, 2651052, AP5204365, PS3529177, EAP3529177.
- 【High Precision Sensor】 The washing machine sensor switch assembly ensures that your clothes are washed to the highest quality by detecting the ideal water level and controlling the machine’s water intake and outflow, which help to protect your precious garments and fabrics by preventing damage. It is a true lifesaver and a must-have in every laundry room!
- 【Premium Material】Our washer water level sensor switch assembly is crafted using high-quality ABS plastic and soft rubber material.You can be sure of a long-lasting and durable solution that guarantees effective performance for your washing machine. This replacement WLS unit is designed as an exact fit for your LG washing machine, ensuring seamless installation and hassle-free use.
- 【Package Includes】1x 6501EA1001C washing machine pressure switch assembly. Body diameter: 2.32 inch, Hose length: 22.56 inch. The pressure sensor is a device used for measuring pressure in liquid.
-
717-1550 Steering Gear Replacement Compatible with Cub Cad et Parts LTX1045 LT1050 GT1554 Lawn Mower – Steering Sector Plate Pinion Gear 717-1550F Compatible with Troy Bilt Toro Craft man Lawn Tractor
$21.99Add to cartAbout this item
- 【Compatible Models】The gear assembly is compatible with ①Cub Cab et GTX1054, GT1054, GT1554VT, LTX1042, LTX1040, SLTX1050, LTX1050KW, LTX1050VT, LTX1050KH. ②TORO LX46, LX420, LX423, LX425, LX426, LX427, LX460, LX466, LX500, GT2300, GT2200, GT2100. ③Troy-Bilt Super Bronco, Horse Lawn Tractor. For exact models, please check the description.
- 【Replaces Part Number】717-1550, 717-1550A, 717-1550B, 717-1550C, 717-1550D, 717-1550E, 717-1550F, 7171554, 1193976, 1120862.
- 【Specifications】The package includes: sector plate 717-1550 x 1; pinion gear 717-1554 x 1; metal bushing x 1; bolt x1; nut x 1. Please note that steering shaft bushing is not included.
- 【Durable to Use】Our steering sector plate and pinion gear is made of high quality material to ensure its good replacement and durability, which means our pinion gear is less prone to rust or wear in actual use.
- 【Application】If you feel your lawnmowers is struggling to turn when using, it is time to change the steering sector gear plate! A new steering gear kit can perfectly fix the turning problem and allows you to make accurate turns in your garden and makes mowing comfortable and enjoyable.
-
Replacement 18 1/2 Grill Cleaning Kit Compatible with Weber Kettle Grill – One-Touch Cleaning System Kit for WEB Kettle Grill 31001, 441001, 441004, 451001, 451004, Replace 7443, 90719, 90992
$16.99Add to cart- 【Compatible Models】The Grill Cleaning Kit is compatible with Weber one touch kettle: 31001, 441001, 441004, 451001, 451004, 461001, 461004, 1241004 (2010), 1251004 (2010), 441995, 441009, 31009, and other original 18 1/2 inch charcoal kettle.
- 【Replaces Part Number】7443, 90719, 90992, (WEB)77811, (WEB)77812, (WEB)77813, 307443, 307408, 3618.
- 【Good Helper for Cleaning】To assemble the One-Touch Cleaning System Kit, follow six steps: Blade assembly, flipping your grill over, blades securing with washer, control rod insertion, and handle rotation till the kit snaps into place.Then you can enjoy a hassle-free cleaning experience by effortlessly adjusting oven exhaust and removing dust with the metal bar.
- 【Top-notch Material】Our one touch cleaning system features durable iron blades, designed to resist heat and last longer with a thicker build, so you can say goodbye to deformation and damage. Plus, the corrosion-resistant coating means you won’t have to worry about frequent replacements or maintenance.
- 【Packing List】1 one-touch cleaning system set consists of 3 damper blades, 1 damper control rod, H-drive assembly, a thumb screw and an installation instruction.
-
4134 141 0300 Air Filter Compatible with Stihl String Trimmer Brush Cutter KM130R FS120 FS200 FS250 FS300 FS350 FS400 FS450 – Air Filter Cleaner Replaces 4134-141-0300 41341410300, 5 Pack
$10.99Add to cartAbout this item
- Compatible with Stihl String Trimmer Brush Cutter, model BT 120, BT 121, BT 131, FR 350, FR 450, FR 480, FS 120, FS 120 R, FS 200, FS 200 R, FS 250, FS 300, FS 310, FS 350, KM 130, KM 130R ect .
- Air filter cleaner replaces Stihl 4134 141 0300, 41341410300, 4134-141-0300.
- Using high-quality filter paper at a reasonable price ensures greater mileage and engine performance.
- Easy to install: ①Remove the screw and the filter cover; ②Clean the filter cover and the surrounding area of coarse dirt. ③Remove and replace the air filter; ④Reinstall the filter cover and screw it shut.
- Package included: 5 x air filter. Air filter width 2.8″, length 3.45″, height 1.05″.
-
5/16 Boat Motor Fuel Filter 35-879885T 35-879885Q Compatible with Mercury Mariner – 4-Stroke Outboard Engine In-Line Fuel Filter for 135/150/175/200/225/250 VERADO, 30 EFI, 40 EFI, 60 EFI – 2 Pack
$9.49Add to cartAbout this item
- 【Compatible Models】The under-cowl in-line fuel filter is compatible with Mercury Mariner 4-Stroke/4-Cyl 135 VERADO, 150 VERADO, 175 VERADO, 200 VERADO, 225 VERADO, 250 VERADO, 275 VERADO, 300 VERADO, 30 EFI, 40 EFI, 50 EFI, 60 EFI. For detailed models, please check the description.
- 【Replace Parts】Mercury: 35-879885Q, 35-879885T, 879885T, Quicksilver: 879885Q, 35-879885K, 879885K, 18-718.
- 【Translucent Design】The transparent body of fuel filter offers a unique advantage by enabling easy monitoring of fuel content and detecting debris. This feature ensures fuel cleanliness and quality, enhancing performance and efficiency. Additionally, these inline fuel filter include an arrow indicating installation direction for your convenience.
- 【Protection】The outboard inline fuel filter effectively eliminates harmful fuel-borne contaminants that can adversely affect performance. It serves as a reliable defense, safeguarding 4-Stroke outboard engines from these damaging particles.
- 【Valued Package】With two filters included in one package, you’ll always have a spare on hand to quickly swap out and ensure optimal fuel quality.
-
3-Side 9 Edger Blade 781-0748 Compatible with Craftsman Troy-Bilt MTD Lawn Edger – Tri-Star Trencher Blade for B&S Sears McLane Gas Edger,Replace 781-0748-0637 40-009 490-105-M017 981-0748, 1 Pack
$11.99Add to cart- 【Compatible Models】The 3-side edger star blade is compatible with ①Troy-Bilt TB500, TB550, TB554; ②Cub Cad et LE 100; ③Craftsman 247.762460, 247.762660, 247.772461, 247.796510, 24779651; ④MTD 25A-560A190 25A-564A401 etc. For more models, please check the description.
- 【Replace Part Numbers】781-0748, 781-0748-0637, 40-009, 490-105-M017, 981-0748, CMXGZAM105017 and 7185767.
- 【Efficiency】Our lawn mower edger blade combines exceptional efficiency with smooth operation, ensuring quick and precise cuts. With reduced noise and vibrations, you can enjoy better control and stability. The steel edger enhances safety, making mowing your lawn a breeze while achieving professional results.
- 【Durability】The tri-cut blade is designed with durability in mind, it can withstand wear and tear while still performing effectively. The steel blade is built to last and maintain its shape and sharpness for many mowing cycles.
- 【Valued Package】Package comes with 1 X steel blades that are made of durable metal material. The blades are coated in a sleek black color, added protection against wear and tear.
-
50026858 Leaf Blower Vacuum Bag for Worx WGBAG500 Blower – Trivac Leaf Collection Bag 50015035 Compatible with Worx WG505, WG509, WG500, WG501, WG502, WG508 Blower with Durable Zipper
$17.99Add to cartAbout this item
- 【Compatible Models】Leaf blower vacuum bag replacemen part number is 50015035 50026858 WGBAG500. Compatible with Worx Model WG505, WG509, WG500, WG501, WG502, WG508
- 【Adjustable Shoulder Strap】Upgrade your leaf collection experience with our innovative debris bag featuring adjustable shoulder straps! Effortlessly carry your bag during long hours of yard work, enjoying unmatched comfort and convenience.
- 【Easy Closure System】The collection bag’s high-quality zipper glides smoothly, allowing you to effortlessly open and close it. The durable zipper can withstand heavy loads and frequent use without getting stuck or damaged, making it simple to pour out your debris or leaves with minimal effort.
- 【Specification】Our fallen leaves bag is made of a durable blend of 20% polyester and 80% cotton, ensuring that it holds up to the rigors of yard work season after season. With a maximum capacity of 10 gallons, it can easily clean up even the biggest piles of leaves and debris.
- 【Easy Installation】To attach the bag to your blower or vacuum cleaner, you only need to connect its interface to the corresponding interface on your device. With this setup, you can easily collect debris and leaves without any hassle.
-
Car Drying Nozzle Compatible with EGO Leaf Blower – Stubby Blower Nozzle for EGO 530, 575, 580, 615, 650, 765 CFM Blower Efficient, Scratch-Free, and Professional-Grade Auto Dryer (1 Pack Nozzle)
$29.99Add to cart- 【Compatible Models】 The car drying nozzle is compatible with 530, 575, 580, 615, 650, 765 CFM Leaf Blower, fits the leaf blower perfectly. Easy to install ,locks on you tool very well.
- 【Silicone Guard】Our car drying nozzle features a silicone tip that protects against accidental scratches or damage to your vehicle’s paint job. Enjoy peace of mind and a seamless drying process with this added bonus feature.
- 【Upgraded Performance】The stubby nozzle is designed to provide a concentrated and forceful airflow, greatly enhancing the speed and efficiency of the drying process. Its powerful stream ensures a thorough and expedited drying experience for your vehicle’s surface.
- 【Easy To Install】Installing this car drying nozzle is a breeze, simply slide it onto the blower barrel and push until it’s securely in place. When it’s time to remove it, press down on the bottom to release and easily take it off. Additionally, please be aware that when using the nozzle, it may emit a loud pitched sound. We recommend using ear plugs or other protective measures to safeguard against potential hearing damage.
- 【Specification】For the green silicone guard: 1.8″ x 2.9 Dia.; For the black part, 8.6″ x 2.7″ Dia. Advice to use ear plugs or something to protect from the noise.
-
24 Pack Girls Straws for Party Favors Decorations – Reusable Drinking Fruits Straws for Fruits Themed Party Supplies, Girls Party Baby Shower
$9.99Add to cartAbout this item
- Fruits Straws: 24 Pcs,10.5” tall X 0.23” diameter. Great length for most of cups. One-time use or re-use after washing.
- 6 bright colors mixed (pink,blue,red,purple,green,yellow,), cute design Fruits attachments, each color accounts for 4 pieces. the fruits patterns on the straw can come off.
- Lovely Designs: girl with fruit straws meet everyone’s rainbow dream. Great for party decoration or goodie bags gifts. Kids will love them.
- These Fruits straws are beautiful, add fun to any party, great for birthday or baby shower, family reunion, girls night out. Also suitable for outdoor picnics, hiking, trips and office use.
- Made of safety quality plastic, these straws are sturdy and strong, can be used together at a family gathering or event party other tableware.
